REBLOC

PRECAST CONCRETE BARRIER SYSTEMS

What is REBLOC?

Barriers with a minimum design life of 50 years are mandated for permanent use in England on central reserves of roads with high traffic volumes.

The REBLOC concrete vehicle restraint systems (VRS) are precast products that allow for rapid deployment across the strategic road network.

The off-site manufacture also eliminates wet trades on site, reduces the risk to the workforce with shortened installation times and is immediately operational with no curing time required.

 

Ranging from normal containment to very high containment, our full suite of both permanent and temporary concrete VRS are tested to EN 1317 and are CE marked.

Our precast systems are the product of choice for main contractors as the requirement for off-site manufacture increases.

product overview

Product
Performance Criteria in accordance to EN1317-2
Minimum Installation not including terminals
Weight kgs
Dims mm
Anchoring Requirements
NB100/300_8
Performance Criteria in accordance to EN1317-2 H2W4
Minimum Installation not including terminals 64m
Weight kgs 13500kgs combined
Dims mm Base element – 8000mm x 950mm x 1000mm
Anchoring Requirements Self weighted
RB120Q_8
Performance Criteria in accordance to EN1317-2 H4bW6
Minimum Installation not including terminals 104m
Weight kgs 6260
Dims mm 8000 x 640 x 1200
Anchoring Requirements Terminals only
RB110_8
Performance Criteria in accordance to EN1317-2 H4bW6
Minimum Installation not including terminals 104m
Weight kgs 6000
Dims mm 8000 x 640 x 1100
Anchoring Requirements Terminals only
RB120_7.5
Performance Criteria in accordance to EN1317-2 H4bW5
Minimum Installation not including terminals 82.5m
Weight kgs 6000
Dims mm 7500 x 670 x 1200
Anchoring Requirements Terminals only
RB100SFA
Performance Criteria in accordance to EN1317-2 H4bW4
Minimum Installation not including terminals 96m
Weight kgs 6000
Dims mm 8000 x 560 x 1000
Anchoring Requirements 1 x M16 position securing adhesive anchor per unit
RB120AS_7.5
Performance Criteria in accordance to EN1317-2 H4bW2
Minimum Installation not including terminals 82.5m
Weight kgs 6000
Dims mm 7500 x 670 x 1200
Anchoring Requirements 10 x 1000mm pins per unit in compacted soil
RB120A_7.5
Performance Criteria in accordance to EN1317-2 H4bW2
Minimum Installation not including terminals 75m
Weight kgs 6000
Dims mm 7500 x 670 x 1200
Anchoring Requirements 5 x M20 adhesive anchors per unit in concrete
RB140SFS_5.5
Performance Criteria in accordance to EN1317-2 H4aW4
Minimum Installation not including terminals 88m
Weight kgs 6000
Dims mm 5500 x 720 x 1400
Anchoring Requirements Terminals only
RB120LQ_8
Performance Criteria in accordance to EN1317-2 H2W5
Minimum Installation not including terminals 80m
Weight kgs 6260
Dims mm 8000 x 640 x 1200
Anchoring Requirements Terminals only
RB110L_8
Performance Criteria in accordance to EN1317-2 H2W5
Minimum Installation not including terminals 80m
Weight kgs 6000
Dims mm 8000 x 640 x 1100
Anchoring Requirements Terminals only
RB85BF_8
Performance Criteria in accordance to EN1317-2 H2W5
Minimum Installation not including terminals 56m
Weight kgs 4000
Dims mm 8000 x 440 x 850
Anchoring Requirements Backfilled and embedded 50mm
RB80XAS_8
Performance Criteria in accordance to EN1317-2 H2W5
Minimum Installation not including terminals 80m
Weight kgs 4800
Dims mm 8000 x 590 x 800
Anchoring Requirements Terminals only
RB80H_8
Performance Criteria in accordance to EN1317-2 H2W5
Minimum Installation not including terminals 80m
Weight kgs 4000
Dims mm 8000 x 560 x 800
Anchoring Requirements Terminals only
RB100SFS_8
Performance Criteria in accordance to EN1317-2 H2W4
Minimum Installation not including terminals 96m
Weight kgs 6750
Dims mm 8000 x 680 x 1000
Anchoring Requirements Terminals only
RB80X_8
Performance Criteria in accordance to EN1317-2 H2W4
Minimum Installation not including terminals 80m
Weight kgs 4800
Dims mm 8000 x 590 x 800
Anchoring Requirements Terminals only
RB100SFP_8
Performance Criteria in accordance to EN1317-2 H2W3
Minimum Installation not including terminals 96m
Weight kgs 6000
Dims mm 8000 x 560 x 1000
Anchoring Requirements 1 position securing pin per unit
RB100SF_8
Performance Criteria in accordance to EN1317-2 H2W3
Minimum Installation not including terminals 96m
Weight kgs 6000
Dims mm 8000 x 560 x 1000
Anchoring Requirements Terminals only
RB80XAS_8_4P
Performance Criteria in accordance to EN1317-2 H2W3
Minimum Installation not including terminals 64m
Weight kgs 4800
Dims mm 8000 x 590 x 800
Anchoring Requirements 4 x 1000mm pins per unit in compacted soil
RB80AS_8
Performance Criteria in accordance to EN1317-2 H2W3
Minimum Installation not including terminals 64m
Weight kgs 4000
Dims mm 8000 x 560 x 800
Anchoring Requirements 4 x 1000mm pins per unit in compacted soil
RB92XES_8
Performance Criteria in accordance to EN1317-2 H2W2
Minimum Installation not including terminals 56m
Weight kgs 4800
Dims mm 8000 x 600 x 920
Anchoring Requirements Embedded 120mm into compacted soil
RB80XAS_8_P
Performance Criteria in accordance to EN1317-2 H2W2
Minimum Installation not including terminals 64m
Weight kgs 4800
Dims mm 8000 x 590 x 800
Anchoring Requirements 10 x 1000mm pins per unit in compacted soil/concrete
RB80XA_8_3P
Performance Criteria in accordance to EN1317-2 H2W2
Minimum Installation not including terminals 56m
Weight kgs 4800
Dims mm 8000 x 590 x 800
Anchoring Requirements 3 x pins per unit road side
RB100A_8
Performance Criteria in accordance to EN1317-2 H2W1
Minimum Installation not including terminals 56m
Weight kgs 5600
Dims mm 8000 x 510 x 1000
Anchoring Requirements 5 x M20 adhesive anchors per unit in concrete
RB84XEAL_8
Performance Criteria in accordance to EN1317-2 H2W1
Minimum Installation not including terminals 40m
Weight kgs 4800
Dims mm 8000 x 590 x 840
Anchoring Requirements Embedded 40mm into asphalt / concrete
RB84XEA.3
Performance Criteria in accordance to EN1317-2 H2W1
Minimum Installation not including terminals 32m
Weight kgs 4800
Dims mm 8000 x 590 x 840
Anchoring Requirements Embedded 40mm into asphalt / concrete
RB80XW_8
Performance Criteria in accordance to EN1317-2 H2W1
Minimum Installation not including terminals 32m
Weight kgs 3400
Dims mm 8000 x 360 x 800
Anchoring Requirements Free standing against a rigid wall
RB80A_8
Performance Criteria in accordance to EN1317-2 H2W1
Minimum Installation not including terminals 56m
Weight kgs 3700
Dims mm 8000 x 430 x 800
Anchoring Requirements 5 x M20 adhesive anchors per unit in concrete
RB80L_8
Performance Criteria in accordance to EN1317-2 H1W5
Minimum Installation not including terminals 80m
Weight kgs 4000
Dims mm 8000 x 560 x 800
Anchoring Requirements Terminals only
RB80SAQ_12
Performance Criteria in accordance to EN1317-2 H1W4
Minimum Installation not including terminals 120m
Weight kgs 3000
Dims mm 12000 x 300 x 800
Anchoring Requirements Terminals only
RB80H_8
Performance Criteria in accordance to EN1317-2 H1W4
Minimum Installation not including terminals 80m
Weight kgs 4000
Dims mm 8000 x 560 x 800
Anchoring Requirements Terminals only
RB80_8
Performance Criteria in accordance to EN1317-2 H1W4
Minimum Installation not including terminals 112M
Weight kgs 4000
Dims mm 8000 x 560 x 800
Anchoring Requirements Terminals only
RB80SA_4
Performance Criteria in accordance to EN1317-2 N2W4
Minimum Installation not including terminals 92.7m
Weight kgs 1010
Dims mm 4030 x 300 x 800
Anchoring Requirements Terminals only
RB80L_4
Performance Criteria in accordance to EN1317-2 N2W4
Minimum Installation not including terminals 68m
Weight kgs 1500
Dims mm 4000 x 560 x 800
Anchoring Requirements Terminals only
RB60H_12
Performance Criteria in accordance to EN1317-2 N2W4
Minimum Installation not including terminals 120m
Weight kgs 2180
Dims mm 12000 x 260 x 600
Anchoring Requirements Terminals only
RB80SAQ_12
Performance Criteria in accordance to EN1317-2 N2W3
Minimum Installation not including terminals 108m
Weight kgs 3000
Dims mm 12000 x 300 x 800
Anchoring Requirements Terminals only
RB80_8
Performance Criteria in accordance to EN1317-2 N2W3
Minimum Installation not including terminals 112m
Weight kgs 4000
Dims mm 8000 x 560 x 800
Anchoring Requirements Terminals only
RB140SFS_5.5
Performance Criteria in accordance to EN1317-2 N2W2
Minimum Installation not including terminals 88m
Weight kgs 6000
Dims mm 5500 x 720 x 1400
Anchoring Requirements Terminals only
RB80SA_12
Performance Criteria in accordance to EN1317-2 N2W1
Minimum Installation not including terminals 120m
Weight kgs 3000
Dims mm 12000 x 300 x 800
Anchoring Requirements 4 x pins per unit

Start your next project with Hardstaff

Get Started