Crash Cushions

Hardstaff Barriers provide a comprehensive range of vehicle restraint systems including crash cushions from our sister company Asset International VRS, all of which are Highways England approved and tested in accordance with EN-1317.

QUEST™ CEN

 ASSET QUEST™ CEN crash cushion system has been successfully tested using EN 1317-3 criteria for 110 km/h, 100 km/h and 80 km/h levels.

QuestCEN Logo

QUADGUARD™ CEN

ASSET QUADGUARD™ CEN crash cushion system is designed to protect motorists in vehicles up to 1,500 kg, from roadside hazards as narrow as 610 mm and as wide as 2,285 mm.

QuestGUARD Logo

VECU-STOP®

ASSET VECU-STOP® crash cushion system is based on more than forty years of experience in designing road restraint systems.

Vecu-STOP Logo
EuroTracc Logo

QUEST™CEN

The QUEST™ CEN system has been successfully tested using EN 1317-3 criteria for the 110km/h level.
Consisting of a series of W-beam fender panels supported by diaphragms, the QUEST™ CEN features an innovative integrated front trigger mechanism. During impacts, this mechanism releases the support frame assembly to absorb the energy of the impact. The system is designed to telescope rearward during head-on impacts to absorb the energy of impact and to redirect vehicles during side angle impacts.

FAST AND EASY INSTALLATION

The QUEST™ CEN system is designed for fast and easy installation. The free-standing back-up is only 610 mm wide and the system can be lifted, transported and dropped into place, fully assembled. Only 30 anchors are required for installation.

TRANSITION OPTIONS

Several transition panels are available for the QUEST™ CEN system including:

  • Transition to W-Beam
  • Transition to Concrete Median Barrier

QUADGUARD™CEN

The QUEST™ CEN system has been successfully tested using EN 1317-3 criteria for the 110km/h level.
Consisting of a series of W-beam fender panels supported by diaphragms, the QUEST™ CEN features an innovative integrated front trigger mechanism. During impacts, this mechanism releases the support frame assembly to absorb the energy of the impact. The system is designed to telescope rearward during head-on impacts to absorb the energy of impact and to redirect vehicles during side angle impacts.

FAST AND EASY INSTALLATION

The QUEST™ CEN system is designed for fast and easy installation. The free-standing back-up is only 610 mm wide and the system can be lifted, transported and dropped into place, fully assembled. Only 30 anchors are required for installation.

TRANSITION OPTIONS

Several transition panels are available for the QUEST™ CEN system including:

  • Transition to W-Beam
  • Transition to Concrete Median Barrier

ASSET VECU-STOP®

The progressive concept of the ASSET VECU-STOP® crash cushion system is based on more than forty years of experience in designing road restraint systems.

With specific models ideal for use with ASSET VARIOGUARD® and ASSET ZONEGUARD® the ASSET VECU-STOP® crash cushion provides protection for both road workers and road users on temporary installations.

All models of the ASSET VECU-STOP® crash cushion system consist of hollow cylinders arranged in rows. They are highly effective energy and impact absorbing elements which are guided by a steel wire rope system. Once installed, the system elements of the ASSET VECU-STOP® crash cushion do not require any maintenance.

Full corrosion protection is provided by a hot-dipped galvanised finish. All components are made of steel and may be completely recycled.

The usual method of anchorage for permanent installation is to install a pre-fabricated steel former, then fill it with concrete. Threaded anchorages welded to the reinforcing bars enable the ASSET VECU-STOP® crash cushion to be bolted straight into place, on the reinforced concrete foundation.

Download Here:

ASSET VECU-STOP® Brochure

Contact us

Hillside, Gotham Road,
Kingston-on-Soar
Nottingham, NG11 0DF
T: 0115 983 2304
E: enquiries@hardstaffbarriers.com

Hardstaff Barriers Limited is a limited liability company registered in England and Wales with registered number 2791285 and
registered address at Westhaven House, Arleston Way, Shirley, Solihull, West Midlands, B90 4LH. VAT number: 616 6416 42

10 + 8 =

Hardstaff Barriers Limited is a limited liability company registered in England and Wales with registered number 2791285 and
registered address at Westhaven House, Arleston Way, Shirley, Solihull, West Midlands, B90 4LH. VAT number: 616 6416 42